Classification and use of safety shoes (labor protection shoes)

Writer： admin Time：2022-08-17 16:07:25 Browse：252℃

Safety shoes (labor protection shoes) are all for foot safety protection, which means the same thing. It has many kinds, such as toe protection, anti puncture, insulation, acid and alkali resistance, etc. Safety shoes use specifications oil proof shoes are used in places where oil is splashed on the ground; Waterproof shoes are used in workplaces with accumulated or splashed water on the ground; Cold proof shoes are used to protect the feet of low-temperature workers from frostbite. Anti puncture shoes are used for sole protection to prevent being stabbed by various sharp and hard objects.

The main function of anti smashing shoes is to prevent falling objects from injuring the feet. The toe of the shoe is made of impact resistant material. The main function of steel-making shoes is to prevent burning and stabbing. They should be able to withstand certain static pressure, high temperature and non flammable. These shoes are suitable for smelting, furnace front, cast iron, etc. In addition to the above, there are some special shoe covers, such as canvas, asbestos and aluminum film. Selection and maintenance of protective shoes selection of protective shoes shall be based on the hazard nature and degree of the working environment. Protective shoes shall have product certificate and product specification. Before use, read the manual according to the conditions of use, and use it correctly. Special protective shoes should be inspected and kept clean after use and stored in a dry place without pollution

Selection and use of protective shoes：

(A) In addition to selecting the appropriate type of protective shoes according to the operating conditions, they should also fit and make people feel comfortable. It is very important to carefully select the appropriate shoe size.

(B) The protective shoes shall have anti-skid design to not only protect people's feet from injury, but also prevent accidents caused by operators slipping.

(C) All kinds of protective shoes with different performance shall meet the technical indicators of their respective protective performance, such as toe not being crushed, sole not being stabbed, insulation and conductivity. But safety shoes are not everything.

(D) Before using protective shoes, it is necessary to carefully check or test. In electrical and acid-base operations, damaged and cracked protective shoes are dangerous.

(E) The protective shoes shall be properly kept after use. The rubber shoes shall be washed with water or disinfectant and dried to prolong the service life.