What are the functions of safety shoes?

Writer： admin Time：2022-08-17 16:13:20 Browse：488℃

What are the functions of safety shoes?

1. Antiskid: Polyurethane one-time molding outsole, unique bottom flower design, excellent antiskid performance.

2. Oil resistance: tested according to the oil resistance standard, the volume increase shall not be more than 12%. If the volume does not increase but decreases, the reduction is greater than 0.5% of the original volume or the hardness increase is greater than 10 (Shore A), and the crack growth is not greater than 7mm after 40000 times of flexion according to GB / t3903.1.

3. Anti smashing: the industrial standard (toe protection safety shoes ld50-94) is adopted. The inner lining of toe protection safety shoes is steel Baotou, which has static pressure resistance and impact resistance, anti puncture and anti smashing, and is very safe. It has been tested that the pressure resistance is 10kN, the impact resistance of the toe is 23kg, and the deformation gap in the shoe is > = 15mm after the impact hammer falls freely from 450mm to impact the toe. It is mainly applicable to mining, mechanical construction safety, metallurgy, steel, The leather shoes used in heavy industry such as port hoisting to protect the toes are supported by rubber and elastomer, which are comfortable to wear and do not affect the daily labor operation.

4. Insulation: insulating shoes can be used as auxiliary safety tools and labor protection articles when working on AC 50Hz, 1000V and below or DC 1500V and below power equipment.

5. Anti static: the anti-static leather shoes are produced according to GB4385-1995 standard. The resistance range is 100k'Ω - 1000m'Ω. The product has good air permeability, anti-static, wear-resistant, anti-skid and other functions. It is mainly applicable to aviation, aerospace and hazardous chemical industries to avoid flammable and explosive accidents caused by static electricity.

6. Wear resistance: high-quality sole, suitable for a variety of environments.

7. Anti puncture: it protects the sole of the foot from being stabbed by sharp objects, and can withstand a puncture force of 1100n, which is a national special standard.

8. Acid and alkali resistance: meet the requirements of gb12018-89.